Angel.Care 5000B Maternal/Fetal Monitor

Angel.Care 5000B is a Maternal/Fetal Monitor.

Features:

• 12.1” super-large screen, TFT color display
• Storage and replay of up to 10 hours of fetal /maternal monitoring data
• Light and portable; easy operation; built-in high-capacity batteries; AC/DC power supply
• Able to have printer built in; super-long service life (Mean Time Before Failure, MTBF); able to print waveforms, parameter values and monitoring statuses at real time or store the waveforms, parameter values and monitoring statuses
• Advanced digital signal processing (DSP) technologies are applied for real-time calculation and mode identification
• High-sensitive and multi-chip probe, excellent system S/N rate and calculation accuracy enable to monitor fetuses more safely and reliably
• Various types of voice/light alarming methods and easy-view alarming lights on the top of monitors
• Open system, easy to be integrated into an obstetric care workstation

Standard Configuration:

• FHR, UCP, FM
• ECG/HR
• SpO2 (Saturation of Pulse Oximetry)
• Noninvasive Blood Pressure
• Respiration
• Temperature
• Pulse

Optional Configuration:

• External printer
• Special accessories for neonatus, infants and children
• Fetal ECG

Technical Specifications:

UCP:

• Range: 0-100 pressure units
• Nonlinear tolerance for measurement: ±5%

FHR:

• Probe: 9 chips, wide wave packet
• Strength of ultrasonic wave: less than 3mW/cm2
• Service frequency: 1.0MHz or 2.2MHz
• Signal processing: special digital signal processing (DSP) and mode identification
• Range: 10-240bpm

FM counting method:

• Manual

ECG:

• Lead input: 5-lead ECG cable
• Lead options: automatically switch among I, II, III, avR, avL, avF, and V1~V6 by software
• Gain options: x0.5, x1, x2, and x4
• Scan speed: 12.5mm/s, 25mm/s, and 50mm/s
• HR display: 0~255 beats/min
• Precision: ±1BPM
• Alarming limits: for upper limit: 0~255 beats/min and lower limit: 0~160 beats/min, lead off

NIBP(Noninvasive Blood Pressure):

• Measurement method: automatic non-linear wave
• Alarming limits: upper limit for systolic pressure: 60-399mm HG, lower limit for systolic pressure: 0-160mmHG
• Upper limit for diastolic pressure: 40-250mm HG, lower limit for diastolic pressure: 0-130mmHG
• Upper limit for mean pressure: 50-255mm HG, lower limit for mean pressure: 0-150mmHG
• Precision: ±5mmHG

Temperature:

• Range: 25C~45C
• Precision: ±0.1C(32C-42C)
• Resolution: 0.1C

Pulse:

• Range: 0~255 beats/min
• Precision: ±1 beat/min
• Resolution: 1 beat/min

SpO2

• Detection range: 0~100%
• Resolution: 1%
• Precision: ± 1 for 90-100% and ± 2 for 60-89%
• Alarming limits: upper limit : 80-100%; lower limit: 0-99%

Respiration:

• Detection range: 0-120 beats/min
• Precision: ± 1 beat/min
• Resolution: 1 beat/min

Alarm:

• Range: continuously adjustable for the upper and lower limits
• Method: alarming for each parameter may be individually set to be mute or alarm off
• Cause: over-limited instructions and lead off
• Instruction: voice and screen reaction to the parameter(s)

Printer (Optional)

• Type: High Precision Graphic Printer
• Interface: Standard Parallel Port

Safety specification:

• Complied with the relevant IEC60601 standards

Weight:

• 6.3 kg

Dimensions:

• 320mm x 170 mm x 280mm

Power supply:

• Voltage: AC 100-240V 50 Hz/60Hz